filter semiautomatic Smoke meter

SV-2LB-filter semiautomatic Smoke meter, can be used to detect the smoke level of diesel car, the combustion analysis

  SV-2LB-filter semiautomatic Smoke meter

SV-2LB-filter semiautomatic Smoke meter, which is produced according to the national standard GB/T11798.5-2001 and GB3847-83, can be used to detect the smoke level of diesel car ,the combustion analysis and the research of diesel engine.

  The instrument cramps out a definite store of exhaust from vent-pipe and get them through a certain area of filter paper. Then you can have the test result of exhaust concentration by the black granule on the filter paper (unit: Rb ).

  SV-2LB, equipped with Nixie tube, is easy to operate by Prompt lamp and separately displays the lasted three test result and the average of them.

  Addition: The strong point of SV-2LB: Air compression is not needed while it works.

The main technical parameters:

1Measurement scope  0-10 Rb

   2accuracyNot exceed FS ±3

3Repeatability: Not exceed FS ±2

4StabilityNot exceed FS ±2/h

5Resolution  0.1 Rb

6Environmental condition temperature0~40

              Relative humidity20-80

              Air pressure70~105kPa

              power AC  220V±10%50Hz

7Preheat time 5min

8Sampling system

   swept volume330ml±15ml

   swept actuation time1.4S±0.2S

        tightness of extracting pump   The air infiltration capacity is not exceed 15ml in one minute.

filter specificationwidth:40mm,thickness0.18mm,

Equivalent pore diameter: 45um,

air permeability :3000ml/cm2.min, brightness: 85

Sampling tube: cylinder: 5mm, length: 5m.